First Suit ~ Neffertity

My very first fursuit I ever made was Neffertity in 2018.

Her teeth were made of air dry clay that was coated in several layers of high gloss mod podge, and her whole head was super tight fit. At the time, I thought this was what all fursuit heads were supposed to feel like.

Oh how wrong I was…

Her vision was decent, and she also has a failed super-motion tail that dragged on the ground the whole time I was at BLFC in 2018 and was filthy.

Her head also couldn’t let me look left, right, or up because of a foam plate I installed on the back of her neck.

But I never gave up!

2nd Head ~ Midnight

Initially he was made in 2018 for my boyfriend at the time, who expressed he wanted a fursuit more than anything. I built his head, similar to how I did Neffertity, but improved some things.

He didn’t fit super well, but it wasn’t the worst fit either.

Like Neffertity he also had a super motion tail, which unfortunately didn’t survive due to it’s treatment…

I definitely improved, but at this point in time I still didn’t actually pattern anything. I just laid pieces of fleece over the foam, glued, and cut it to fit the shape.

It was a VERY crude way of finishing a head…

3rd Suit ~ Winza 1.0

Winza was the 3rd fursuit head I ever made, and my very first fullsuit. Made in early 2019, she was the first head I also made a pattern for, and the detail clearly shows! Her markings are much more defined, all hand sewn, and her details popped really well!

She was debuted at BLFC 2019, and I was beyond happy to have her. My first one, and only fursona.

There were definitely a lot of learning curves to making her, moreso of which is explained in her character background and history here: WINZA

In time, I plan to make a full YouTube video to explain more about her suit, and her new 2.0 suit as well.

this section will be updated when the video is released

4th Head ~ Stellar

Stellar was the dutchie I created for my sister. Her head went through quite a few struggles and changes, at one point I completely chopped her snoot off and remade it because I wasn’t happy with it.

She was also the first suit I ever made that featured LED’s in her eyes- which were salvaged from dollar store flashlights… Yeah, not the best solution…

5th head ~ Treble

Treble was a remake/restoration project that was funded by several of his close friends.

This story is bittersweet, so if you’d like to learn more, click the button below.

6th suit ~ Teeg

Teeg was my very first premade! Made in mid-late 2019, he was a rather ambitious dutch angel dragon.

I learned many new things, such as how to detail eyes, texture horns, make puffy paws, and magnetic eyelids!

He was originally put up for auction on The Dealers Den, but had several complications from buyers backing out or failing to make payment. It ended up taking me a whole YEAR to find him a loving home.

He was eventually adopted by @Reita-Kei, where he still lives today.

7th head ~ Whoo-Doo [incomplete]

Whoo-Doo was a dutch angel dragon head commission that I took on shortly after I finished Teeg. He was a character I designed as a commission.

The client who bought his design later came to me and paid to have the head made.
All was going swimmingly well, and his head was nearly complete. He also had a removable skull mask made from EVA foam.
Unfortunately, his owner had a major death in the family, and had to cancel the commission to relocate the funds to the final expenses.

I completely understood, and refunded 65% (per my TOS).

Whoo-Doo still sits on my self to this day, awaiting the time he can be paid for and brought back to life.

8th Suit ~ Vega

Vega was a random project inspired by the dino mask users of TikTok. You can watch her creation here:
PART ONE - PART TWO

I wanted to make a dinomask that was different from all the others I had seen, and using feathers to make a more anatomically correct raptor seemed like a fantastic idea!

I learned a lot about working with moving jaws from Vega, and I also expanded her suit into a full partial.

She has gained her own following and appreciation on TikTok, and is often called the “Raptor Mom”.

9th head ~ Salus the Sergal

Salus was commissioned by a friend of mine who I met at BLFC in 2019.
His head is built on a DVC resin base, from the old sergal mold which is no longer available.

He was my first time ever working with a resin base, and it was certainly a learning curve!
I wanted to make my artistic style of Sergal really shine here, so I invested extra time making his eyes bigger, and his ears more detailed.

10th Suit ~ Saccharum

Saccharum is one of my personal Brightbrow Dragons, and was made in mid 2019. He’s a foul-tempered boy, and believe it or not his head is actually made from a dinomask!

I wanted to create something using the cheap dinomask that showed people you are only limited by your imagination!

He was a crazy challenge to make, and there are a few things I want to fix/improve upon him.

I do actually plan to refurb his head, and make him into a 3/4 partial suit with an exposed torso.

In September 2021 he was given a refurb.

11th Head ~ Corsair

Corsair was a special project for me…
He was created in late 2019 for my significant other, Neozy.

I truly poured my heart and soul into making Corsair the best he could be, and really tried my hardest to capture his giddy exuberant attitude.

Corsair is beautiful, and one of my proudest accomplishments. He also has a fullsuit planned sometime in the future.

However he also is in need of a slight refurb to update his purple chin with the correct color of fur.

I love you my glorious breadlord

12th head ~ Volt

Volt was commissioned by one of my closest friends, @VoltTheDutchie.

He was started in late 2019, and finished in early 2020. I brought him with me for an in-person unboxing at PDFC, which you can watch here: VOLT UNBOXING

Volt’s plush bolt was made by my other friend, @Polu_Art

Volt is the largest head I’ve made to this date.

13th suit ~ Amora

Amora was a Valentines premade that was originally just a tail, paws, and wings. But when she was purchased by @Queen.Amora.Rosa she was upgraded to also have a head!

The design was artistic liberty, and I came up with this lovely little girl.
Her head was made on a FossilFueledFX resin base.

She turned out so incredibly cute, and is very well loved by her momma.

She’s also blacklight reactive!

14th head ~ John Hammond

This unique project was commissioned by Timothy Harrnacker to create a raptor mask version of John Hammond from the Jurassic Park series.

Tim cosplays as John Hammond quite often on his TikTok, and has been a wonderful part of the dinomask community there. Always encouraging others, and duetting their videos.

So when he approached me to have a raptor mask version of the character made, I was more than happy to accept!

The amber gem on his forehead was made from resin, and was something he specifically wanted me to find a way to incorporate into the character design.

He also wanted me to add his glasses, and allow his head to still wear his iconic hat.

Overall this was a really fun project to take on. ^_^

15th suit ~ Tamba

Wow, where to start with Tamba?

Tamba was completed on April 1st 2020, and to this date is one of my largest projects I’ve ever taken on in my entire life!
They were a character I originally adopted, and you can learn more about them on their character page.

Tamba was only my 2nd fullsuit I’ve ever done, and the improvement from Winza 1.0 to Tamba is astronomical!

You can see more about Tamba’s suit in their YouTube Reveal!

Tamba has over 70 hand sewn spots on their fullsuit, and was also the first time I had ever done wings this large. The shear size of them makes the whole proportions of the suit look somewhat silly and very child-like.

Tamba is also a mute suit. So I never speak while in character, and instead use my bird whistle to chirp words and noises.
Tamba is also excellent at communicating with body language.

16th suit ~ Tiberius Rex

Tiberius was originally made as a premade dinomask in October 2019.

He was purchased by @Mirivargus and fully completed in mid 2020. Tiberius is built on the T-rex model of the dinomask, and he proved to be a crazy challenge for me to work with, due to the smaller face size.

He was also my first blacklight reactive suit. And the start of my blacklight obsession...

He was a mini partial, and came with claws, and a super-motion tail.
Upon completion, he was shipped to Sweden and unfortunately fell victim to the UPS bandit… He sustained immense damage, and had to be sent back to me for repairs.

As of Septmber 2021 he was fully fixed and sent back.

17th Head ~ Neonraven

Neonraven was one of the most complex suits I’ve ever made.

She was commissioned by @NeonravenV2, and finished in mid 2020, and you can watch her epic reveal video HERE.

She was built on a Bueshang’s Creations resin base, and all her detailing was done by hand. Including her gorgeous eyes.

She features real feathers that were inlayed into her fur to give the appearance of a feathered head, and the ship on her head is an actual model ship. It was attached via strong magnets.

Her eyes are also Neopixel rings that were programmed by Neozy to have 8 functional colors.
Her earrings are also genuine brass rings.

She also has a Super-Motion skeletal tail, that to this day is still one of my absolute favorite pieces I’ve ever done.

18th Head ~ Peach

Not too much to say about Peach here.

She was commissioned at the same time as Neonraven, and was made from another Bueshang’s Creations resin base.

Her eyes were an odd request from the commissioner (who has no social media outside of discord), who specifically asked that they be drawn onto the buckram EXACTLY as they appeared on the character reference sheet.

The solid white fur of this character made it very difficult to photograph her properly.

I did learn from this project, that some resin skulls can be incredibly tiny and hard to work with effectively.

19th suit ~ Necro

Necro was commissioned in late 2020 for @smolredfox, and was made on a Bueshang’s Creations resin base.

You can go watch her super spooky reveal HERE

I did find it kinda funny that I had 3 Bueshang commissions all in the same year, each for a different species as well! It certainly familiarized me with how to customize them!

Necro was a unique challenge with her stitches holding her body together. I had to get creative to make them look like metal, but also match the red stitches shown in the character ref sheet.

I ended up going with a metallic spandex that worked wonderfully well to pull off the illusion!

Necro also has LED’s in her eyes that can cycle colors, and the eyes themselves are blacklight reactive as well.

She also has mangey-looking paws, arm sleeves, and a super-motion tail.

I also tried out making hair wefts for her mohawk, something I had never even thought of doing before.

But all in all, I’m super pleased with how she came out!

20th suit ~ Winza 2.0

Words alone cannot describe how happy I felt when I finally completed Winza 2.0

I had started her close to the beginning of March 2020, and she was completed on September 3rd, 2020.

Winza, being my fursona, is a truly special character to me.

And after the year that had passed since making Winza 1.0, I had learned so much and improved immensely. I knew she would turn out better than ever, but when I first looked at her fullsuit all together, I cried…

I’m still amazed at the progress I was able to make in just 1 year of fursuit making. My 20th head, and this is what she looked like.
Honestly, I could ramble on and on about her, but I think it’s better to leave that for the YouTube video.

21st suit ~ shawn fennox

Shawn was a rather interesting commission, as he was a partial suit that was built on a dinomask!

He was created for @shawnfennox and completed on September 9th, 2020. Working with his bushy horns was tricky, but definitely fun to figure out!

He also has arm sleeves, claws, a super-motion tail, and large epic wings!

22nd head ~ Ymir [false eyed raptor]

This was a premade released on September 20th, 2020 and was purchased by @Probablyamonster.

This head was made on another dinomask, and was customized using a local find of fur, and featured “invisible” markings.
I had never experimented with this kind of paint before, but the end results speak for themselves!

23rd head ~ Vexa

Vexa was a special raptor mask I created as a gift for my sister, @DaringashiaKS

I wanted to make her a cool, wicked looking raptor that matched her personality well. And with the reveal video I did, I’d definitely say I achieved that!

She also has lots of cool blacklight features for an extra creepy cool vibe!

24th suit ~ Keaanu

Keaanu is a personal suit, and is the 3rd fullsuit I’ve made!
He turned out SO FREAKIN COOL!

His partial was originally finished on November 4th, 2020. And his fullsuit was completed in May 2021.

I tested a new method of slim digi on him, and I loved how it looked so much!
I also made his feet digi styled, and removable via zippers!
(a technique I learned by referencing photos from SpiritPanda’s Patreon)

He honestly looked so amazing that it makes my brain giddy for the next fullsuit I get to create!

26th suit ~ MOCHA

Mocha is a lovely little dutchie who belongs to @mocha_the_dutchie

I was approached by ‘Santa Claus’ when my commission slots opened in November 2020, and was asked if I could rush order her to be finished and shipped in time for a Christmas unboxing.

With Santa’s Elves willing to pay my rush fee, I was more than happy to do so!

Mocha was officially completed in just 2 weeks and was mailed out in time for a lovely Christmas surprise!

She was the first suit I had made with classic feet paws as well!

27th suit ~ Stickers

Officially completed on January 10th, 2021 - Stickers the Coyote marked my first canine suit commission!

She was created for @chompthreads

I used the Kloofsuits head base pattern for her, and modified it to fit a more coyote-like head shape.
I also experimented with special removable eyelids, and for the first time ever, a plantigrade bodysuit!

She also features a super- motion canine tail, and a removable hair poof!

Stickers was also the first suit I’ve made that survived being in a washing machine!

28th suit ~ Nunmul

This interesting critter is a Jackalope Scvader. A creature I didn’t even know existed until this commission from @clestialserpent came into my workshop.

Making a character with an asymmetrical neck and such tall ears was quite the challenge to undertake.

Also making anime-like hair that didn’t totally blind the wearer was tricky too!

Overall I was pretty happy with how he turned out, despite the countless struggles I went through during his construction.

Created on February 15th, 2021 for @_drizzle.drawz_

This suit was a special build for me, as Drizzle is one of my closest and most wonderful friends. Being the one to make her suit come to life was truly a special honor, and I can’t wait till the day comes that I can make the rest of her suit.

The gradients on her ears were done by carefully hand dying with fabric markers and insane amounts of patience.

She’s fully lined, and has micro glitter on her white feathers for a neat little touch.

Checkout her reveal video HERE

Created March 3rd, 2021, this suit was sold at auction to: @LuciusDerg

This head is built on the Kloofsuits pattern, and was modified to have a more German Sheppard look to it.
He has pretty sparkly golden accents and vibrant green tones to really give off that St.Patty’s day vibe!

On February 26th, I saw a video where @snowfoxmedia had a terrible accident…
Her house caught fire, and her dinomask named Cotton Candy survived, but was unfortunately severely damaged.

Knowing how important she was to her, I reached out and asked if I could get a hold of the mask to repair it. She was beyond grateful for my generosity, and around March 26th I finished the refurb and update.

I couldn’t assist financially in this situation, but I was able to help mend her heart.

On May 4th, 2021 the fire dragon premade, nicknamed “Fresh Embers” was completed!

This suit was auctioned as a partial suit with a head, hands, a tail, and medium wings. It sold within the first 8 hours of being listed as a fullsuit! (see later post)

His head was built on a foam base by EverydayKitsune

He is now owned by @Starthedragon

CHARACTER COMPLETION: NANASHI

Around July 25th, 2021 the Fresh Embers premade was completed as a fullsuit!

He has a slim-digi build that sticks very closely to the body shape. His belly plates also hide the center zipper to allow the wearer to get in and out of the suit more easily.

If you’d like to see how this suit is put on, you can check out his suit-up video.

On July 4th, 2021 the auction for this Manokit went up! Themed around fireworks, this suit was a mini partial with a head, tail, and hand paws.

Head base was a foam cast by DreamVisionCreations and the handpaws were the Kloofsuits pattern.

Upon launching the auction, it sold within 24 hours as a fullsuit! The buyer also allowed me to artistic liberty design the rest of the character.

The fullsuit was completed roughly around September 27th, 2021. You can check out the showcase video for him here on my YouTube channel!

This was the first suit I ever made for a larger person, so modeling it properly was a challenge to say the least… But it did make for a pretty funny blooper at the end of the showcase video. ;)

He’s made entirely with HowlFabrics furs and is such a lovely suit!

On July 29th, 2021 I completed the head for Zodiac the Blackhole Bat for @Vallibite!

He is fully lined, has posable antennae, and has gloriously bouncy ears!

He was definitely a challenge though, as I’d never done a bat before!

On August 3rd, 2021 Scout the Lynx/Goat was complete!
You can see a video of her in motion HERE!

@Scout_Monster has been a close and amazing friend to me for a long time now, and I really wanted to go above and beyond to thank her for such genuine friendship. So I set to work remaking her old Scout suit that she couldn’t wear much anymore for several reasons.

It was a long slog, but in the end I completed this absolutely stunning kitty!

Her head was built on a 3D printed headbase by NukeCreations.

She also has several removable eyelids, 2 tongues, and fully sewn-in padding for worry free washing and wear!

On September 24th, 2021 I finally finished the secret commission for @Nightsevera of their Ampwave!

You can see the awesome motion in THIS VIDEO

I’m so stoked to have been one of the first few makers to do an Ampwave fullsuit!

He has large bass speaker paws, zip-on feet, a magnetic chestplate, and a fabulous super-motion tail.

I’m so insanely proud of this suit!

Kashika’s head was built on a 3D printed head base by NukeCreations, with her spotty fur coming from BigZFabrics and all other furs from HowlFabrics.

Around October 20th I completed the head for Lea the Cat-Fish for @Madoka73!

Her head is built on a foam head base by NukeCreations, and her hand paws are the 5-Finger pattern by Kloofsuits.

She also has a long floor dragging tail, as well as digigrade feet paws and large wings.

He sure is one handsome derg!

Around January 10th, 2022 I completed the surprise bodysuit for @HipHoppatron’s character Rolix the dragon!